Instructions for HP OfficeJet 3830 Scanner Setup

Struggling with HP OfficeJet 3830 scanner setup? Facing difficulty in scanning the documents from your printer? Well, in this blog, you will get to know the simple instructions for HP OfficeJet 3830 scanner setup. HP Officejet 3830 printer is one of the ultimate printers mainly used in small and medium-sized business enterprises. It comes with advanced wireless network communications. Some of the main features of the HP Officejet 3830 printer are AirPrint setup, two-sided printing, ePrint, mobile printing, and others. Let’s go ahead.

  

Simple Instructions for HP OfficeJet 3830 Scanner Setup

The user can use the HP Smart app or HP Easy scan on their Windows or Mac devices for HP Officejet 3830 printer scanner to the computer. HP OfficeJet 3830 scanner setup is a simple process. Once you complete the printer setup successfully then you can install the scanning software for your HP Officejet 3830 printer. Look at the below instructions for HP OfficeJet 3830 scanner setup by downloading HP Officejet 3830 scanner software for Windows and Mac devices.

Steps for HP OfficeJet 3830 Scanner Setup for Windows

Go through the below steps for HP OfficeJet 3830 scanner setup for the Windows device:

1. The photo or document should be printed on the scanner bed and then it is covered with the scanner lid.
2. Click on Scan under the HP Officejet 3830 scan window.
3. After that, you need to select your printer in the scanner menu. Also, choose the scan job type from the Preferences menu.
4. Use the down arrow to view and change the scan orientation, quality settings, and color.
5. Click on the next button to proceed further. Thereafter, your printer will scan the document.
6. In the next step, tap on Add or Scan the next item to scan the additional media. Tap on the Done button.
7. Now, tap on the thumbnail of the scanned image to show it in the main preview window.
8. Tap on Edit to adjust colors, adjust the scan or adjust the size.
9. Next, tap on the Save in the lower right side of the Window in order to save the scans to the appropriate folder on a Windows computer. Click on that folder.
10. A new window displays on the screen. Here, you can browse the folder menu and save the image. At last, tap on the Save button.

Steps for HP OfficeJet 3830 Scanner Setup for Mac

Follow the below steps for HP OfficeJet 3830 scanner setup for Mac devices by using HP OfficeJet 3830 scan software:

1. Firstly, find out whether the HP Officejet 3830 scan is installed on your Mac device or not.
2. After that, open the Finder under the top menu bar. Click on the Go button.
3. Thereafter, click on the scan application.
4. In the next step, find the HP scan by double-clicking on the HP folder.
5. If you get an HP Officejet 3830 scan in the list then double-click on the app and then go to the further steps. In case, you do not get your HP scan on the list then you can contact the expert professional team for further guidance and immediate solutions.

Hopefully, the above-mentioned details will help you in HP OfficeJet 3830 scanner setup without any difficulty.

 

How To Resolve Lexmark Firmware Error 900

 Nobody wants their printer to stop working while printing or scanning any document. But, what if the Lexmark printer is showing the Lexmark Firmware Error 900 with the error code 900.00? Then, it means you need to resolve the issues with proper steps for the Lexmark Firmware error 900. Once this issue will be resolved, you can have the printouts without any interruption. Moreover, it is a basic need for all organizations. As one single minute may cost them to lose so many dollars. So, let’s start with the steps to resolve the Lexmark Firmware error 900.

 

Steps To Resolve Lexmark Firmware Error 900

When you see the error code 900.00 on your Lexmark printer, then it means you cannot print anything. This error code 900.00 signifies that your Lexmark printer is not receiving the command for printing from your system. So, it is very important to resolve this issue to start printing again with the Lexmark Firmware printer. Therefore, follow the following steps to resolve this issue of Lexmark Firmware error:

• Turn the power off for the Lexmark printer.
• Now, disconnect the power plug from the electrical outlet as well.
• Also, disconnect all the other cables like a USB cable or ethernet cable from the Lexmark printer.
•  Now, let the printer be in an idle state for 4-5 minutes.
•  Then, again connect the power cable for the Lexmark printer.
• Also, connect the Lexmark printer to the power supply.
• Then, in your system, delete all the printing jobs for your Lexmark printer.
• Now, power on your Lexmark printer with the power button.
• Then, connect the USB and ethernet cable as well with the Lexmark printer.
• Take a test printout with Lexmark printer to check the successful resolution of the printing issue.

If still, you are not able to print with the Lexmark printer, it means the issue of outdated Lexmark firmware. So, there is a need to update the Lexmark printer firmware.

Steps To Update Lexmark Firmware

To update the Lexmark printer firmware, you need to apply the following steps:

1. On the display panel of the Lexmark printer, select the Menu option.
2. From the menu, select the option of Reports.
3. Now, on the control panel of the printer, press the Menu Setting button.
4. With this, your Lexmark printer will start printing.
5. In the printout taken from the Lexmark printer, you need to check for the Firmware level information.
6. Again, go to the Reports option on the display panel.
7. On checking the level information, if it is below the P128, then you need to go with the steps mentioned below.

Check the Settings With EWS (Embedded Web Server)

• Connect your Lexmark printer to the internet with the help of an ethernet cable.
• Now, in your system, launch a web browser like Google Chrome.
• Check the IP address mentioned on your Lexmark printer.
• After that, in the address field, enter the noted IP address in the address field.
• Find the option of Reports and click over it.
• Again, check the Device Information in the report that firmware should be at P128 level.

    Install The Latest Firmware For Lexmark Printer
   
    To install the Lexmark Firmware Update, go with the following steps:

• In the browser of your system, visit the link to the Lexmark home page.
• Then, select the option of the “Support And Download”.
• Search for your Lexmark printer model in the search field on the Lexmark printer website.
• In the list of the Lexmark softwares, select the latest firmware software for the Lexmark printer.
• Click on the Download button to install the latest firmware update.
• Then, open the downloaded file, and install the latest firmware update.
• On the completion of the installation, restart the system to apply the settings.

No More Lexmark Firmware Error 900

Summing up! These steps will resolve the issue of  Lexmark Firmware Error 900 in simple steps. The steps for the update of the Lexmark printer’s firmware are also mentioned in this blog. So, it is the complete guide for you. In case, there is an issue, contact our team for expert help. Therefore, now your printer will start receiving the printing commands from your system. So, you can start printing again with the Lexmark printer.